|
Sr. No. |
Name of Student |
Details of Publication |
|
1 |
DESHPANDE KAUSTUBH MUKUND |
Effectiveness of Building Information Modelling in Residential Construction Project, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
2 |
GAWALI NINAD VASANT |
Investigating bond behaviour between Geopolymer concrete (GPC) & Bamboo, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
3 |
INAMDAR PAYAL SATYANARAYAN |
Experimental Investigation of Mechanical & Microstructural Behaviour of 3D Printed Concrete Structure, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
4 |
PRIYANKA RAMRAO JADHAO |
1.Evaluation of Category and Criteria for Rating System, International Conference of Innovation in Mechanical & Civil Engineering 2023 2.Evaluation of Green Rating System for Building, International Journal of Construction Engineering and Planning, Vol. 9 Issue 1, 2023 |
|
5 |
SURAJ DASHARATH KALE |
Earned Value Analysis of a Road Project, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
6 |
KAMBLE RUSHIKESH SARJERAO |
Storm-Water Runoff Prevention by Pervious Pavement System, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
7 |
PATIL SAURABH NANDLAL |
Durability Study and use of Construction and Demolition Waste Aggregate in Concrete, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
8 |
PAWAR OMKAR SUBHASH |
Development of Intelligent Wired Probe (IWP) for real time tracking of changing behavior of soil, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
9 |
PIRJADE JUNAID HARUNRASHID |
Curing Solution by Adding Millennium 21 Admixture for M20 Concrete, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
10 |
SHAHAPURKAR SATVIK SURESH |
Development of Structural Health Monitoring System for Existing and New Building Elements, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
11 |
SURVE SHAMAL SHANKAR |
Cost Effectiveness, Life Cycle Assessment & Sustainability Assessment of 3D Printed Concrete Structure, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
12 |
SUPEKAR DHIRAJ RAJENDRA |
Influence of Addition of polypropylene Fibre in 3D Printed Concrete, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
13 |
VIBHUTE ANUJA CHANDRASHEKHAR |
Analysis of Defects in Concrete, International Conference of Innovation in Mechanical & Civil Engineering 2023 |
|
14 |
KADGAYE DEVYANI G. |
Development of Smart Strips in the House for Safety Monitoring, STM Journals 2013, Springer Nature |
|
Sr. No. |
Name of Student |
Details of Publication |
|
1 |
ARGADE ABHISHEK NAVNATH5 |
"Structural Audit of Building: A Structural Health Analysis of Building", International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 p-ISSN: 2395-0072 |
|
2 |
CHAVHAN SAYALI SATISH |
"Impact of Building Information Modelling (BIM) on Performance of Construction Project", International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 p-ISSN: 2395-007 |
|
3 |
DESAI SHREYASH DHANAJI |
"Investigation on Causes of Delays in Residential Building Construction Project", International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 p-ISSN: 2395-0072, Volume: 09 Issue: 07 I July 2022 |
|
4 |
KULKARNI KSHITIJA PRADEEP |
"Quantitative Analysis of Delay Risk for Residential Building using Primavera Risk Analysis Software", International Conference on Innovations in Mechanical & Civil Engineering (I-MACE 2022) |
|
5 |
KHAIRNAR KALPESH RAJENDRA |
"Energy Efficient Building for Indian Climatic Zone", International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 p-ISSN: 2395-0072 |
|
6 |
KANDEKAR SANKET BALASAHEB |
"Design of Embeddable Concrete Strength Sensor", Elsevier, ISSN- 2214-7853 |
|
7 |
DESHMUKH MAHENDRA SHIVAJI |
"Waste Water Management for Small Village", YMER Digital, ISSN: 0044-0477, Volume 21 Issue 07 (July 2022) UGC |
|
8 |
PAPAL SHREYAS REONNATH |
"Resource Optimization in Mivan Construction Project", International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 p-ISSN: 2395-0072 |
|
9 |
PATIL KUNAL JITENDRA |
Characteristics of Concrete and Challenges in 3D Concrete Printing- International conference on Innovation in Mechanical and Civil Engineering (iMACE) 2022 |
|
10 |
RUPWATE ANIKET BHAUSAHEB |
Experimental Investigation and Prediction of Mechanical Properties of Fly Ash based Geopolymer concrete - (Elsevier)-ISSN :0950-0618 |
|
11 |
SHAH PARTH RANJEET |
Application of ERP and Microsoft Project on Ongoing Construction Project- International Conference on Innovation in Mechanical and Civil Engineering (iMACE) 2022 |
|
12 |
SANCHETI PIYUSH PRAIN |
Internet of Things (IoT) kit for Human Head Safety in Construction Project- International Research journal of Engineering and Technology (IRJET)- e-ISSN:2395-0056, p-ISSN:2395-0072 |
|
13 |
SHEKHAR ADITYA BALASAHEB |
Analysis and Simulation of Mechanism system for 3D Concrete Printer-International Conference on Innovation in Mechanical and Civil Engineering (iMACE) 2022 |
|
14 |
TADGE SHRUTI RAMCHANDRA |
Nozzle Optimization For 3D Concrete Printer- International Conference on Innovation in Mechanical and Civil Engineering (iMACE) 2022 |
|
15 |
WAGHAMARE RATNADEEP |
Development of Concrete strength sensor - (Elsevier)-ISSN - 2214-7853 |
|
Sr. No. |
Name of Student |
Details of Publication |
|
1 |
BHUSHANRAJE MADHUKANT |
“A Case Study -Role of Construction Management In Building of Fast Track And Emergency Services in Covid-19”, International Journal Of Advance Scientific Research And Engineering Trends, ISSN-2456-0774, UGC |
|
2 |
AKASH CHANDRAKANT GOVALKAR |
“Design And Selection of Components for Automated Omnidirectional Marking Vehicle”, International Research Journal of Engineering And Technology, ISSN- 2395-0056 |
|
3 |
KRISHNA HOLIPRASAD GUPTA |
1. “Optimization of Dispatching Schedule of Ready Mixed Concrete (RMC) Plant For Multi-Plant And Multi-Site Operation Condition: A Literature Review”, Journal Of Emerging Technologies And Innovative Research, ISSN- 2349-5162, UGC 2. “Optimization of Dispatching Schedule of Ready Mixed Concrete (RMC) Plant Using Genetic Algorithm for Multi-Plant And Multi-Site Operation Condition”, Engineering Science And Technology, An International Journal, PAPER ID - JESTCH-D-21-02796 |
|
4 |
PRADNYA SURESH LOKHANDE |
“Evaluation of Construction Labour Safety for High Rise Building at PCMC Area”, SJST, EMID-3a22cd59ce7a1c17 |
|
5 |
PRANAV BHARAT MHASKE |
“Feasibility Study for a Residential Construction Project: A Case Study”, International Research Journal of Engineering and Technology, Vol-8, Issue 5, May 2021 |
|
6 |
SAYALI SHYAM PILARE |
“BIM Clash Detection of PEB Structure using MBS (Metal Building Software)”, Advances in construction technology and management (actm-2021), ACTM2021_04_204 |
|
7 |
AKSHAY MAROTI PUDKE |
“Design and Development of Quadcopter with Paint Spray Mechanism”, International Research Journal of Engineering and Technology, ISSN - 2395-0056. |
|
8 |
PALLAVI PRAMOD SALUNKHE |
“Assessment of Construction Delay Issue in Residential Projects and Its Analysis Using Failure Mode & Effect Analysis”, SJST, EMID- 81640d43ac317af1 |
|
S. N. |
Faculty Name |
Project Title |
Funding Agency |
Grants Received / Sanctioned |
Year of Sanction |
Status |
|
1 |
Mr. T. S. Khambekar, and Dr. S. T. Mali |
Enhancement of rate of biodegradation and rate of generation of methane from organic fraction of municipal solid waste using novel hybrid bioreactor landfill. |
PCCOE, Seed funding |
195000/- |
2022-23 |
OnGoing |
|
2 |
Dr. D. S. Lal |
Development and Optimization of 3 D Concrete Printer with Digital Twinning Operation from Mixing to Printing |
La Foundation, Dassault System, Pune |
7,20,000/- |
2022-23 |
Concluded |
|
3 |
Dr. D. S. Lal |
Development of 3 D Concrete Printed Full Scale Civil Engineering Structure Using Gantry Frame Mechanism |
Scientific and Industrial Research Organization (SIRO) |
4,99,150/- |
2022-23 |
Concluded |
|
4 |
Dr. A.K. Gaikwad and Dr. D.S. Lal |
ProCON for designing Light Weight Concrete with Sintered aggregates |
in Association with PCERF from November 2023 to June 2024. |
3,45,000/- |
2023-24 |
OnGoing |
|
GRAND TOTAL |
17,59,150/- |
|||||
|
Sr. No. |
Name of Student |
Title of Project |
Status |
|
1 |
AGRAWAL PRITEE MUKESHLAL |
Experimental investigation of Concrete Modified with Tamarind Gum Biopolymer as a Green Admixture |
OnGoing |
|
2 |
ATHARE TEJAS ANIL |
Enhancing Precision in Land Management Through Integrating Drone Survey & GIS based Measurement's |
OnGoing |
|
3 |
HIRE SUMIT SHYAM |
Thermal And Acoustic Performance Of 3 D Printed Concrete Structure |
OnGoing |
|
4 |
PAWAR ROSHAN VITTHAL |
Navigating the Challenges in 3 D Printed Concrete |
OnGoing |
|
5 |
RAUT ANIKET KISHOR |
Proposition of structural reinforcement in 3D printed Concrete Structure |
OnGoing |
|
6 |
GAIKWAD ANISHA SHAILESH |
Evaluation Of Construction Issues & Challenges in Construction Industry |
OnGoing |
|
7 |
GOTARKAR DIVYANKA MILIND |
Enhancing Accuracy and Efficiency in Precast Building Construction using Augmented Reality (AR) Enabled Building Information Modeling (BIM) |
OnGoing |
|
8 |
IZATE GAYATRI SANJAY |
Estimation of potholes using real time object detection with You Only Look Once (YOLO) algorithm |
OnGoing |
|
9 |
PANCHAL VAIBHAVI ANIL |
A Systematic Approach to Structural Maintenance: Integrating NDT Data with Genetic Algorithm |
OnGoing |
|
10 |
PASHANKAR KAUSTUBH AJAY |
Development of Economical, Light Weight Concrete using Sintered Aggregates |
OnGoing |
|
11 |
PUJARI SHRADDHA PRASHANT |
Analytical Investigation of Bamboo-Concrete Composition Wall Panel |
OnGoing |
|
Sr. No. |
Name of Student |
Title of Project |
Status |
|
1 |
DESHPANDE KAUSTUBH MUKUND |
Effectiveness of Building Information Modelling in Residential Construction Project |
Completed |
|
2 |
GAWALI NINAD VASANT |
Investigating bond behaviour between Geopolymer concrete (GPC) & Bamboo |
Completed |
|
3 |
INAMDAR PAYAL SATYANARAYAN |
Experimental Investigation of Mechanical & Microstructural Behaviour of 3D Printed Concrete Structure |
Completed |
|
4 |
PRIYANKA RAMRAO JADHAO |
Evaluation of Green Rating System for Building |
Completed |
|
5 |
SURAJ DASHARATH KALE |
Earned Value Analysis of a Road Project |
Completed |
|
6 |
KAMBLE RUSHIKESH SARJERAO |
Storm-Water Runoff Prevention by Pervious Pavement System |
Completed |
|
7 |
PATIL SAURABH NANDLAL |
Durability Study of Construction and Demolition Waste Aggregate in Concrete |
Completed |
|
8 |
PAWAR OMKAR SUBHASH |
Development of Intelligent Wired Probe (IWP) for real time tracking of changing behaviour of soil |
Completed |
|
9 |
PIRJADE JUNAID HARUNRASHID |
Curing Solution by Adding Millennium 21 Admixture for M20 Concrete |
Completed |
|
10 |
SHAHAPURKAR SATVIK SURESH |
Development of Structural Health Monitoring System for Existing and New Building Elements |
Completed |
|
11 |
SURVE SHAMAL SHANKAR |
Cost Effectiveness, Life Cycle Assessment & Sustainability Assessment of 3D Printed Concrete Structure |
Completed |
|
12 |
SUPEKAR DHIRAJ RAJENDRA |
Influence of Addition of Polypropylene Fibre in 3D Printed Concrete |
Completed |
|
13 |
VIBHUTE ANUJA CHANDRASHEKHAR |
Analysis of Defects in Concrete |
Completed |
|
14 |
KADGAYE DEVYANI G. |
Development of Smart Strips in the House for Safety Monitoring |
Completed |
|
Sr. No. |
Name of Student |
Title of Project |
Status |
|
1 |
ARGADE ABHISHEK NAVNATH |
Structural Audit of Building: A Structural Health Analysis |
Completed |
|
2 |
CHAVHAN SAYALI SATISH |
Impact of Building Information Modelling (BIM) on Performance of Construction Project |
Completed |
|
3 |
DESAI SHREYASH DHANAJI |
Investigation on Causes of Delays in Residential Building Construction Project |
Completed |
|
4 |
KULKARNI KSHITIJA PRADEEP |
Risk Assessment of Construction Project Using Primavera Risk Assessment Software |
Completed |
|
5 |
KHAIRNAR KALPESH RAJENDRA |
Energy-Efficient Building For Indian Climatic Zones |
Completed |
|
6 |
KANDEKAR SANKET BALASAHEB |
Design of Embeddable Concrete Strength Sensor |
Completed |
|
7 |
DESHMUKH MAHENDRA SHIVAJI |
"Waste Water Management For Small Village |
Completed |
|
8 |
PAPAL SHREYAS REONNATH |
Resource Optimization InMivan Construction Project" |
Completed |
|
9 |
PATIL KUNAL JITENDRA |
Mix Proportioning and Printability in 3D Concrete Printing (Sponsored) |
Completed |
|
10 |
RUPWATE ANIKET BHAUSAHEB |
Experimental Investigation and Prediction of Mechanical Properties of Fly Ash-based Geopolymer Concrete |
Completed |
|
11 |
SHAH PARTH RANJEET |
Application of ERP and Microsoft Project on Ongoing Construction Project (Sponsored) |
Completed |
|
12 |
SANCHETI PIYUSH PRAIN |
Internet of Things (IoT) kit for Human Head Safety in Construction Project |
Completed |
|
13 |
SHEKHAR ADITYA BALASAHEB |
Design and Analysis of Frame Mechanism for 3D Concrete Printer (Sponsored) |
Completed |
|
14 |
TADGE SHRUTI RAMCHANDRA |
Pump and Nozzle Characteristics for 3D Concrete Printer (Sponsored) |
Completed |
|
15 |
WAGHAMARE RATNADEEP |
Development of Concrete strength sensor |
Completed |
